Soft Edge 82 Bar Stool; Soft Edge 90 Bar Stool - Hay Boa Table Disassembly

–

SOFT EDGE 82 BAR STOOL

1. Turn the bar stool upside down.
2. Remove the cap from the gliders.
3. Unscrew the screw and remove the gliders' receivers.
4. Unscrew the screws holding the footrest and remove it.
Footrest - Steel
Cap - PA
Screws - Steel
Receivers - PP
Frame, seat - Wood
32
– –

SOFT EDGE 90 BAR STOOL

1. Hold the seat and backrest while unscrewing the rivets,
using a power drill with a 10mm bit.
2. Pull out the gliders from the legs.
3. Turn the bar stool upside down and drill out the rivets holding the cover.
Backrest - Wood
Seat - Wood
Rivets - Aluminium
Frame - Steel
Gliders - PE-LLD
Cover - PP
33
–
Ø10mm