Soft Edge 40 Chair - Hay Boa Table Disassembly

– AAS 38
1. Turn the chair upside down.
2. Remove all the bushings from the bottom of the seat.
3. Remove the gliders and the footrest from the legs.
4. Separate the base from the seat.
Gliders - Polyethylene
Frame - Steel
Fittings - Steel
Shell - Recycled
pol ypro pyle ne
22
– –

SOFT EDGE 40 CHAIR

1. Hold the seat and backrest while unscrewing the rivets,
using a power drill with a 10mm bit.
2. Pull out the gliders from the legs.
3. Turn the chair upside down and drill out the rivets holding the cover.
Backrest - Wood
Seat - Wood
Rivets - Aluminium
Frame - Steel
Gliders - PE-LLD
23
–
Ø10m Ø10mm m
Cover - PP