Soft Edge 40 Chair With Upholstery; Soft Edge 50 Sled - Hay Boa Table Disassembly

–

SOFT EDGE 40 CHAIR WITH UPHOLSTERY

1. Hold the seat and backrest while unscrewing the rivets,
using a power drill with a 10mm bit.
2. Pull out the gliders from the legs.
3. Turn the chair upside down and drill out the rivets holding the cover.
4. Remove the upholstery and the foam from the wooden shell.
24
–
Cover - Textile
Foam - PU
Seat - Wood
Backrest - Wood
Rivets - Aluminium
Screws - Steel
Frame - Steel
Cover - PP
Gliders - PE-LLD
–

SOFT EDGE 50 SLED

1. Hold the seat and backrest while unscrewing the rivets,
using a power drill with a 10mm bit.
2. Unscrew the gliders from the sled legs.
3. Turn the chair upside down and drill out the rivets holding the cover.
Backrest - Wood
Seat - Wood
Rivets - Aluminium
Frame - Steel
–
Ø10mm
Cover - PP
25