Advertisement
ASSEMBLY INSTRUCTIONS
Tighten nut onto screw
with included wrench.
Repeat on other side.
Place the nuts and washers
to the side for now.
The rollers help to move the bike when it is tilted forward and
should not touch the oor when the bike is in a regular stand-
ing position. When properly installed, the rollers will face
outward from the front of the bike (see images). If the rollers
touch the oor, uninstall the foot, turn around, and reinstall.
Place the washer onto screw.
8
8 8 8
Take both nuts and
washers o of front foot
with rollers.
IInstall front foot onto
front main frame leg.
Screw on the nut.
Advertisement
Need help?
Do you have a question about the SlimCycle and is the answer not in the manual?
Questions and answers
I love my SlimCycle but Why did my odometer go back to 0 and start over? No...I did not take the batteries out.
The odometer (ODO) on the New Image SlimCycle does not reset when using the [RESET] or [MODE] buttons. If your odometer reset to 0, it may be due to a power loss, such as battery removal or depletion. Check the battery compartment and replace the batteries if needed.
This answer is automatically generated
where do I purchase the resistance bands
You can purchase resistance bands for the New Image SlimCycle on eBay, specifically from the seller High Street TV, who offers related fitness products.
This answer is automatically generated
How do fold the bike for storage
How do you unfold a slim cycle bike
How do I unlock the bike after folding for storage