Advertisement
ASSEMBLY INSTRUCTIONS
Align the seat handles
with holes on the bottom
of the backrest support.
Tighten down screws with
included large hex
key/screwdriver tool.
Tighten down screws with
included large hex
key/screwdriver tool.
12
12 12 12
Place screws into holes
and nger tighten.
Align backrest against
backrest support. Insert
screws and nger tighten
(see parts diagram).
Advertisement
Need help?
Do you have a question about the SlimCycle and is the answer not in the manual?
Questions and answers
I love my SlimCycle but Why did my odometer go back to 0 and start over? No...I did not take the batteries out.
The odometer (ODO) on the New Image SlimCycle does not reset when using the [RESET] or [MODE] buttons. If your odometer reset to 0, it may be due to a power loss, such as battery removal or depletion. Check the battery compartment and replace the batteries if needed.
This answer is automatically generated
where do I purchase the resistance bands
You can purchase resistance bands for the New Image SlimCycle on eBay, specifically from the seller High Street TV, who offers related fitness products.
This answer is automatically generated
How do fold the bike for storage
To fold the New Image SlimCycle bike for storage:
1. Ensure the bike is not in use and is stable.
2. Tilt the bike forward to engage the rollers for easier movement.
3. Fold the main frame by releasing the locking mechanism (not detailed in the context, but usually a latch or pin near the frame center).
4. Make sure the bike is securely folded before moving or storing it.
Note: Folding may be physically difficult for some users, as mentioned in the context.
This answer is automatically generated
How do you unfold a slim cycle bike
How do I unlock the bike after folding for storage
To unlock the New Image SlimCycle bike after folding it for storage, loosen the circular adjustment knob on the main frame and pull the hinged legs outward to unfold the bike. Then, snap the bike securely back into its correct position for use.
This answer is automatically generated