Control Panel - New Image SlimCycle Assembly And User's Manual

BUTTONS:
[RESET] clears data from
selected mode.
• To reset all stored information
from previous workout, press
for 3 seconds.
• Does not clear total exercise
miles (ODO).
[MODE] selects mode.
• To reset all stored information
from previous workout, press
for 3 seconds.
• Does not clear total exercise
miles (ODO).
[SET] programs new setting for
selected mode.
• To increase setting more quick-
ly, press for 3 seconds. Release
and press again to program.
DISPLAY:
Display turns o after 4 minutes when not in use.
TIME, DIST, CAL, and PULSE: Default to previous setting until reset
([RESET]) or programmed with new setting ([SET]).
SCAN: Cycles through all functions below. Press [MODE] to make selection.
TIME: Press (RESET] to time workout or [SET] to program a countdown timer.
When countdown reaches 0, alarm will sound. Press any button to silence.
SPEED: Displays estimated MPH.
DIST: Press [RESET] to display distance in miles for current workout or [SET] to
program a countdown from distance goal. When countdown reaches 0, alarm will
sound. Press any button to silence.
CAL: Press [RESET] to display estimated calories expended or (SET] to program a
countdown from calorie goal. When countdown reaches O, alarm will sound. Press
any button to silence.
ODO: Displays total exercise miles of all workouts.
PULSE: Press [RESET] to display heart rate or [SET] to program a target heart rate.
User must hold the heart rate monitor grips on the handle bars for heart rate to
display. Whenever target heart rate is surpassed, alarm will sound. To silence,
remove hands from heart rate monitor grips or press (RESET].

CONTROL PANEL

SCAN
TIME
SPEED
RESET MODE
DIST
CAL
ODO
PULSE
SET
17
17