Vecow VCM-1000 User Manual page 88

4.4.2 PCH-IO Configuration
Figure 4-4-2 : PCH-IO Configuration
State After G3
Specify what state to go to when power is re-applied after a power failure (G3
state).
4.4.2.1 SATA Configuration
Figure 4-4-2-1: SATA Configuration
SATA Controller(s)
Enable/Disable SATA Device.
4.4.3 Module Management
Figure 4-4-3: Module Management
M2B_CN1 Type
Select M2B_CN1 Type.
©Vecow VCM-1000 User Manual BIOS SETUP 80