Table of Contents
Advertisement
X6DAT-G/X6DAi-G User's Manual
Hardware Monitor Logic
CPU Temperature Threshold
This option allows the user to set a CPU temperature threshold that
will activate the alarm system when the CPU temperature reaches this
pre-set temperature threshold. The options are 85
100
o
C.
Highlight this and hit <Enter> to see monitor data for the following items:
CPU1 Temperature: This item displays CPU1 Temperature.
CPU2 Temperature: This item displays CPU2 Temperature.
System Temperature: This item displays the system Temperature.
Fan Speed Control Modes:
This feature allows the user to decide how the system controls the speeds
of the onboard fans. If the option is set to "3-pin Server", the fan speed is
controlled by the CPU temperature. When the CPU temperature is higher,
the fan speed will be higher as well. If this option is set to "4-pin", the
onboard fan speeds are controlled by Thermal Management via PWM. If set
to "Disable," the fan speed control is disabled and the onboard fan will run
at the full speed (12V) at all time. Select 3-pin if your chassis came with 3-
pin fan headers. Select 4-pin if your chassis came with 4-pin fan headers.
Select Server if your system is used as a server. Select Workstation if your
system is used a Workstation. The Options are: "Disable", "3-pin Server",
"3-pin Workstation", "4-pin Server" and "4-pin Workstation".
Fan1 Speed to Fan8 Speed
Power Voltages:
Vcore A
Vcore B
P3V3
P5V
N12V
P12V
VDD
P5Vsb
4-18
o
C, 90
o
C, 95
o
C and
Advertisement
Table of Contents
