Supermicro X6DAi-G User Manual page 64

X6DAT-G/X6DAi-G User's Manual
Cache Extended Memory
If enabled, this feature will allow the data stored in the extended memory
area to be cached (written) into an area in the Static DRAM or written into
L1, L2, L3 cache
"Uncached" to disable this function. Select "Write Through" to allow data to
be cached into the buffer and be written into the system memory at the
same time. Select "Write Protect" to prevent data from being written into
the memory area above 1 MB . Select "Write Back" to allow CPU to write
data back directly from the buffer without writing data to the System Memory
for fast CPU data processing and operation. The options are "Uncached",
"Write Through", "Write Protect", and "Write Back".
PCI Configuration
Access the submenu to make changes to the following settings for PCI
devices.
Onboard GLAN (Gigabit- LAN) OPROM Configure
Enable the bootable firmware-Option ROM (OPROM) on GLAN to allow
the user to boot the system from GLAN. The options are Enabled and
Disabled.
Reset Configuration Data
If set to Yes, this setting clears the Extended System Configuration Data-
(ESCD) area. The options are Yes and No.
PCIX 66MHz ZCR Slot#1/PCIX 66MHz Slot#2/PCI 33MHz Slot#3/
PCI Express x8 Slot#4/PCI 33MHz Slot#5/PCI Express x16 Slot6
Access the submenu for each of the settings above to make changes to
the following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM.
The options are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus
master. The options are Enabled and Disabled.
inside the CPU to speed up CPU operation. Select
4-10