Table of Contents
Advertisement
2. Insert the CPU in the socket, mak-
ing sure that pin 1 of the CPU aligns
with pin 1 of the socket (both cor-
ners are marked with a triangle).
When using only one CPU, install it
into CPU socket #1 (socket #2 is au-
tomatically disabled if only one CPU
is used).
3. Press the lever down until
you hear the *click*.
means that the CPU is securely
installed in the CPU socket.
Heatsink Installation
(*Heatsinks are heavy. Please handle with care.)
1. Do not apply any thermal compound
to the heatsink or the CPU die; the re-
quired amount has already been ap-
plied.
2. Place the heatsink on top of the CPU
so that the four mounting holes are
aligned with those on the retention
mechanism.
3. Screw in two diagonal screws (ie
the #1 and the #2 screws) until just
snug (do not fully tighten the screws
to avoid possible damage to the CPU).
4. Finish the installation by fully tight-
ening all four screws.
This
2-3
Chapter 2: Installation
Pin 1
Socket lever in the
locking Position
Heatsink
Screw#1
Screw#1
Screw#2
Screw#2
Advertisement
Table of Contents
