Table of Contents
Advertisement
X6DAT-G/X6DAi-G User's Manual
Clock Spectrum Feature
If "Enabled", the Phoenix BIOS will detect and attempt to reduce the
Electromagnetic Interference caused by the components. The options are
Enabled and Disabled.
DRAM Data Integrity Mode
If enabled, this feature allows the data stored in the DRAM memory to
be ECC (Error Checking & Correction) compliant . The options are 72-bit
ECC, 144-bit ECC, Auto and Disabled.
ECC Error Type
This setting lets you select which type of interrupt to be activated as a
result of an ECC error. The options are None, NMI (Non-Maskable
Interrupt), SMI (System Management Interrupt) and SCI (System Control
Interrupt.)
SERR (System Error) Signal Condition
This setting specifies the conditions required to be qualified as an ECC
error. The options are None, Single Bit, Multiple Bit and Both.
USB Device 29, Function 2 & 3
This setting allows you to Enable or Disable all functions for the USB
devices specified.
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The
settings are Enabled and Disabled.
4-12
Advertisement
Table of Contents
