Table of Contents
Advertisement
X6DAT-G/X6DAi-G User's Manual
Logging In
To login:
1. Start Adaptec Storage Manager – Browser Edition.
* In Windows, click Start > Programs > Adaptec Storage Manager > Adaptec
Storage Manager – Browser Edition.
* In Linux, click Start > System > Adaptec Storage Manager.
The Login screen appears.
2. Enter the host name or IP address of the system you want to manage and
the username and password you would use to log into that system.
3. Click Login.
(*Note:
When running Adaptec Storage Manager for the first time:
* You need to install a security certificate if you chose not to during the
installation process. For instructions see the
section-"Installing a Security
Certificate."
* You are asked to register your software. For instructions see the section-
"Registering Your
Software".
To log in from any system with a Web browser:
1. Start the Web browser application and type the IP address for the system
you want to access in the address bar and press Enter. For example,
https://10.6.3.14:3513/adaptec.
When connection to the remote system is established, the System Login
screen appears.
(*Note: If you are using a proxy server to access the Internet, you must
bypass the proxy server to access the Adaptec Storage Manager Web
server. See the
section-"Configuring Internet Browsers on Windows"
for
details.)
2. Enter the host name or IP address of the system you want to manage and
the administrative username and password that you would normally use to
log into that system.
3. Click Login.
C-10
Advertisement
Table of Contents
