Quick Reference - Supermicro X6DAi-G User Manual

Jumper Description
JBT1 CMOS Clear
JK1 Keylock Enable
JP13 3rd PWR Supply Failure Alarm Enab.Open (Disabled)
JP15 Reboot Option Enable
JPAC Audio Enable/Disable
JPF Force Power On
JPL1 Giga-bit LAN Enable/Disable
JPS1(*X6DAT) Serial ATA Enabled
JWD Watch Dog Enable
Connector
J1B4
J1D1,J32
J6, J38
J3, J4
J9
J22
J23
J24
JAR
JC1, JC2
JD1
JF1
JL1
JOH1
JP8
JP12
JHS1/JHS2
JLAN 1
JS1-JS4 (*X6DAT only) M-SATA0-3:Mavell's Serial ATA 0-3 Headers
JS10 (*X6DAT only)
JS9 (*X6DAT only)
FAN #1-#8
DIMM#1A-#4B
DS1-4,DS9-12 (*X6DAT)Marvell's SATA Status LEDs (*DS1:PRE0,
WOL(JWOL)
WOR(JWOR)
USB#0-1(J40)
USB#2-3(JD2)

Quick Reference

Description
Primary 24-pin ATX PWR Connector
12V 8-pin PWR/12V 4-pin CPU PWR Connectors
COM1/COM2 Serial Port Connectors
IDE1/2 Hard Disk Drive Connectors
Keyboard/Mouse
System Management Bus
Parallel (Printer) Port
Power System Management Bus
PWR Fail Alarm Reset
Audio: Mic(JC1), Line-In/Line-Out(JC2)
PWR LED (Pins1-3), Speaker (Pins 4-7)
Front Panel Control
Chassis Intrusion Header
Overheat LED
Floppy Disk Drive Connector
Power Fault Connector
I-SATA0/1:Intel (6300 ESB) Serial ATA0/1 Headers
G-bit Ethernet Port
2
SATA I C:Serial ATA System Management Bus
Serial ATA Activity LED Connector
Chassis Fans Headers/CPU Fan1/CPU Fan2
Memory (RAM) Slots#(1A,1B, 2A,2B, 3A,3B,4A,4B)
DS9:ACT0/DS2:PRE1, DS10:ACT1/DS3:PRE2,
DS11:ACT2/DS4:PRE3,D12:ACT3)
Wake-on-LAN Header
Wake-on-Ring Header
(Back Panel) Universal Serial Bus Ports
(Front Panel) Universal Serial Bus Headers
1-5
Chapter 1: Introduction
Default Setting
(See Chapter 2)
Close (Enabled)
Open (Enabled)
Pins 1-2 (Enabled)
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)