Table of Contents
Advertisement
X6DAT-G/X6DAi-G User's Manual
1-3
Special Features
Recovery from AC Power Loss
BIOS provides a setting for you to determine how the system will respond
when AC power is lost and then restored to the system. You can choose
for the system to remain powered off (in which case you must hit the
power switch to turn it back on) or for it to automatically return to a power-
on state. See the Power Lost Control setting in the Advanced BIOS Setup
section (Peripheral Device Configuration) to change this setting.
fault setting is Last State.
1-4
PC Health Monitoring
This section describes the PC health monitoring features of the SUPER
X6DAT-G/X6DAi-G.
that supports PC health monitoring.
Onboard Voltage Monitors for the CPU Cores, Chipset
Voltage, Memory Voltage, +3.3V, +5V, +12V, -12V and +5V
Standby
An onboard voltage monitor will scan these voltages continuously. Once a
voltage becomes unstable, a warning is given or an error message is sent
to the screen. Users can adjust the voltage thresholds to define the sensi-
tivity of the voltage monitor.
Fan Status Monitor with Fan Speed Control
The PC health monitor can check the RPM status of the cooling fans. The
onboard 4-pin CPU and chassis fans are controlled by the thermal manage-
ment functions under in the BIOS.
Environmental Temperature Control via Supero Doctor III
The thermal control sensor monitors the CPU temperature in real time and
will trigger the fan to speed up whenever the CPU temperature exceeds a
user-defined threshold. The overheat circuitry runs independently from the
CPU. It can continue to monitor for overheat conditions even when the CPU
is in sleep mode. Once it detects that the CPU temperature is too high, it will
automatically trigger the fan to speed up to prevent any overheat damage to
All have an onboard System Hardware Monitor chip
1-10
The de-
Advertisement
Table of Contents
