Table of Contents
Advertisement
Chapter 4: Phoenix BIOS
Type
Type
This feature allows the user to select the type of IDE hard drives. The
option- "User" will allow the user to enter the parameters of the HDD
installed at this connection. The option-"Auto" will allow the BIOS to
automatically configure the parameters of the HDD installed at the
connection. Choose the option"1-39" to select a pre-determined HDD
type. Select CD-ROM if a CD-ROM drive is installed. Select ATAPI if a
removable disk drive is installed.
Multi-Sector Transfers
This feature allows the user to select the number of transfer sectors.
The options are Disabled, 2, 4, 6, 8 and 16 Sectors.
LBA Mode (Large Block Access) Control
Select Enabled to allows the Phoenix BIOS to access the IDE Channel
0 Master Device via LBA mode. The options are Disabled and Enabled.
32 Bit I/O
This option allows the user to enable or disable the function of 32-bit
data transfer. The options are Enabled and Disabled.
4-5
Advertisement
Table of Contents
