Supermicro 8060 User Manual page 106

S S 8060
UPER ERVER
Check
Point
99
9A
9B
9C
9D
9E
A2
A3
A4
A5
A7
A8
Manual
Description
Any initialization required after the option ROM test has
been completed.
printer base address next.
Set the timer and printer base addresses.
RS-232 base address next.
Returned after
Performing any
Coprocessor test next.
Required initialization before the Coprocessor test is
over. Initializing the Coprocessor next.
Coprocessor initialized.
initialization after the Coprocessor test next.
Initialization after the Coprocessor test is complete.
Checking the extended keyboard, keyboard ID, and
Num Lock key next.
next.
Displaying any soft errors next.
The soft error display has completed.
keyboard typematic rate next.
The keyboard typematic rate is set.
memory wait states next.
Memory wait state programming is over.
screen and enabling parity and the NMI next.
NMI and parity enabled.
required before passing control to the adaptor ROM at
E000 next.
Initialization before passing control to the adaptor ROM
at E000h completed.
ROM at E000h next.
Configuring the timer data area and
setting the RS-232
required initialization
Performing
Issuing the keyboard ID command
Performing any initialization
Passing control to the adaptor
B-8
Setting the
base address.
before the
any required
Setting the
Programming the
Clearing the