Table of Contents
Advertisement
Chapter 7: BIOS/Setup
CPU4 Current Temperature
The current temperature of CPU2 is displayed here.
System Overheat Warning
The options for this setting are Enabled and Disabled . When set to
Enabled the user is given the opportunity to set the overheat warning
temperature.
Overheat Warning Temperature
Use this setting to set the CPU overheat warning temperature. The
options are 25 °C through 75 °C in 1 °C intervals. Note: The Optimal
and Fail-Safe default settings are 55 °C .
H/W Monitor CPU1
H/W Monitor CPU2
H/W Monitor CPU3
H/W Monitor CPU4
H/W Monitor (+3.3V)
H/W H/WMonitor (+5V)
H/W Monitor (+12V)
H/W Monitor (+2.5V)
CPU1 Fan
CPU2 Fan
CPU3 Fan
CPU4 Fan
The above features are for PC Health Monitoring. The motherboards with
W83781D have seven onboard voltage monitors for the CPU core, CPU I/
O, +3.3V, +5V, -5V, +12V, and-12V, and for the four-fan status monitor.
OnBoard FDC
This setting enables the FDC (Floppy Drive Controller) on the motherboard.
The options are Disabled and Enabled .
OnBoard Serial Port1
This setting specifies the base I/O port address of serial port 1. The
options are Disabled , 3F8h , 2F8h , 3E8h and 2E8h .
OnBoard Serial Port2
This setting specifies the base I/O port address of serial port 2. The
options are Disabled , 3F8h , 2F8h , 3E8h and 2E8h .
7-17
Advertisement
Table of Contents
