Table of Contents
Advertisement
Check
Point
Description
28
Initialization before setting the video mode is complete.
Configuring the monochrome mode and color mode
settings next.
2A
Bus initialization system, static, output devices will be
done next, if present.
2B
Passing control to the video ROM to perform any
required configuration before the video ROM test.
2C
All necessary processing before passing control to the
video ROM is done.
and passing control to it.
2D
The video ROM has returned control to BIOS POST.
Performing any required processing after the video
ROM had control.
2E
Completed post-video ROM test processing.
EGA/VGA
display memory read/write test next.
2F
The EGA/VGA controller was not found.
memory read/write test is about to begin.
30
The display memory read/write test passed.
retrace checking next.
31
The display memory read/write test or retrace checking
failed.
read/write test next.
32
The alternate display memory read/write test passed.
Looking for alternate display retrace checking next.
34
Video display checking is over.
mode next.
37
The display mode is set.
message next.
Appendix B: AMIBIOS POST Diagnostic Error Messages
controller
Performing
B-3
Looking for the video ROM next
is
not
found,
the
alternate
Setting the display
Displaying the power on
If the
performing
the
The display
Look for
display
memory
Advertisement
Table of Contents
