Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ Server 1020A-T. Instal-
lation and maintainance should be performed by experienced technicians only.
The 1020A-T is a high-end 1U rackmount server based on the SC813T+-500
server chassis and the H8DAR-T serverboard, which supports single or dual AMD
Opteron™ 200 series processors and up to 16 GB of DDR400/333 or 32 GB of
DDR266 SDRAM memory.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the H8DAR-T serverboard and
the SC813T+-500 chassis, which make up the 1020A-T.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the 1020A-T into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you
to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface
Advertisement
Table of Contents
