Table of Contents
Advertisement
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
Specifies to redirect the console to Onboard COM A or Onboard COM B.
This setting can also be Disabled.
BAUD Rate
Select the BAUD rate for console redirection. Options are 300, 1200,
2400, 9600, 19.2K, 38.4K, 57.6K and 115.2K.
Console Type
Choose from the available options to select the console type for console
redirection. The options are VT100, VT100,8bit, PC-ANSI, 7bit, PC ANSI,
VT-UTF8.
VT100+,
Flow Control
Choose from the available options to select the flow control for console
redirection. The options are: None, XON/XOFF, and CTS/RTS.
Console Connection
Select the console connection: either Direct or Via Modem.
Continue CR after POST
Choose whether to continue with console redirection after the POST
routine. Options are On and Off.
Hardware Monitor Logic
CPU Temperature Threshold
This option allows the user to set a CPU temperature threshold that will
activate the alarm system when the CPU temperature reaches this preset
temperature threshold. The options are 85
Highlight this and hit <Enter> to see monitor data for the following items:
CPU1/2 Temperatures: This item displays the temperatures of CPU1/2.
o
C, 90
o
C, 95
7-17
Chapter 7: BIOS
o
C and 100
o
C.
Advertisement
Table of Contents
