Table of Contents
Advertisement
Figure 6-5. Removing a SCSI Drive Carrier
Figure 6-6. Mounting a SCSI Drive in a Carrier
Important:
are installed, all SCSI drive carriers must remain in the
!
drive bays to promote proper airflow.
3.
SCSI backplane
All eight SCSI drives plug into a single SCSI backplane, which provides
Ultra320 single-channel operation for all eight SCSI drives. A ribbon cable
from JA1 on the serverboard should be connected to the IN connector on
the SCSI backplane. There are also two power connectors on the
backplane that must be connected. See Figure 6-7 for the locations of
backplane connectors - the reverse side of the backplane has five
connectors that the SCSI drives plug into when inserted with a SCSI drive
carrier or mobile rack.
Chapter 6: Advanced Chassis Setup
Regardless of how many SCSI hard drives
6-7
Advertisement
Table of Contents
