Table of Contents
Advertisement
Frequency for PCIX#1-#2/SCSI
This option allows the user to change the bus frequency for the devices
installed in the slot indicated. The options are Auto, PCI 33 MHz, PCI 66
MHz, PCI-X 66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
Frequency for PCIX#3/G-LAN
This option allows the user to change the bus frequency of the devices
installed in the slot indicated. The options are Auto, PCI 33 MHz, PCI 66
MHz, PCI-X 66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
Frequency for PCI-X #4/PCI-X #5
This option allows the user to change the bus frequency of the devices
installed in the slot indicated. The options are Auto, PCI 33 MHz, PCI 66
MHz, PCI-X 66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
PCI-X 100MHz ZCR Slot #1/PCI-X 100MHz Slot#2/PCI-X
133MHz Slot #3/PCI-X 133MHz Slot#4/ PCI-X 133MHz Slot#5/PCI-
Exp x8 Slot#6
Access the submenu for each of the settings above to make changes to
the following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM.
Options are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus
master. Options are Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-
priority, high-throughout device may benefit from a greater Clock rate.
Options are Default, 0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and
00E0h.
For Unix, Novell and other Operating Systems, please select
the option: other. If a drive fails after the installation of a
software , you might want to change this setting and try again.
Different OS requires different Bus Master clock rate.
7-11
Chapter 7: BIOS
new
Advertisement
Table of Contents
