NordicTrack VR PRO User Manual page 11

13. Orient the Seat (9) as indicated by the sticker.
Attach the Seat (9) to the Seat Handlebar (10)
with four M6 x 18mm Screws (25) and four M6
Washers (88) (only two of each are shown);
start all the Screws, and then tighten them.
14. Slide the Backrest Back (81) onto the Seat
Handlebar (10).
Attach the Backrest Back (81) with four M6 x
30mm Screws (75) and four M6 Washers (88);
start all the Screws, and then tighten them.
13
10
14
81
88
75
10
11
9
88
25