Table of Contents
Advertisement
8. While a second person holds the Console (4)
near the Handlebar (7), connect the wires on
the Console to the Main Wire (43), to the Frame
Pulse Wires (42), and to the Extension Wire (86).
Insert the excess wire into the Handlebar (7) or
into the Console (4).
9. Tip: Avoid pinching the wires. Attach the
Console (4) to the Handlebar (7) with four M4 x
16mm Screws (77).
10. Attach the Upright Cover (57) to the Handlebar
(7) with two M4 x 16mm Screws (77).
8
4
Console
Wires
9
4
Avoid pinching
the wires
10
9
7
86
43
42
7
77
7
57
77
Advertisement
Table of Contents
