Table of Contents
Advertisement
3. Orient the Upright (2) as shown. Have a second
person hold the Upright near the front of the
Frame (1).
Tie the lower end of the wire tie in the Upright
(2) to the Main Wire (43), to the Frame Pulse
Wire (42), and to the Extension Wire (86) in the
Frame (1).
Pull the upper end of the wire tie until the wires
are routed through the Upright (2).
4. Tip: Avoid pinching the wires. Slide the
Upright (2) onto the Frame (1).
Attach the Upright (2) with four M10 x 62mm
Screws (70); start all the Screws, and then
tighten them.
3
Wire Tie
Wire Tie
43
86
42
4
Avoid pinching
the wires
7
2
1
2
70
Advertisement
Table of Contents
