NordicTrack VR PRO User Manual page 8

5. Press the mount on the Front Shield (58) into the
Frame (1). Then, press the Front Shield into the
Left and Right Front Shields (13, 14).
6. Orient the Upright Cover (57) as shown. Hold the
Upright Cover near the Upright (2), and insert
the wires upward through the Upright Cover.
Then, slide the Upright Cover (57) onto the
Upright (2).
7. Orient the Handlebar (7) as shown. While a
second person holds the Handlebar near the
Upright (2), insert the wires upward through the
Handlebar.
Tip: Avoid pinching the wires. Attach the
Handlebar (7) to the Upright (2) with two M8 x
22mm Screws (69).
5
13
6
Wire Tie
57
7
7
69
69
Avoid pinching
the wires
8
1
58
14
2
Wires
Wire Tie
2
Wires