Appendix C: System Specifications - Supero SuperServer 7042P-8R User Manual

Supermicro superserver 7042p-8r servers: user guide
Table of Contents

Advertisement

System Specifications
Processors
Single or dual 603-pin Intel
front side (system) bus speed of 400 MHz.
Note: Please refer to the support section of our web site for a complete listing of supported
processors. (http://www.supermicro.com/TechSupport.htm)
Chipset
Intel E7500 (Plumas) chipset
BIOS
®
4 Mb Phoenix
Flash ROM
Memory Capacity
Eight 184-pin DDR DIMM sockets supporting up to 16 GB of registered
ECC DDR-200 (PC1600) SDRAM
Note: Interleaved memory - requires memory to be installed two at a time. PC2100 memory
modules are supported but only at 200 MHz. See the memory section in Chapter 5 for details.
SCSI Controller
Adaptec AIC-7902 for Ultra320 onboard SCSI
Peripheral Drives/Bays
One (1) 3.5" floppy drive
Three (3) 5 1/4" drive bays
Seven (7) 3.5 x 1" drive bays (for SCSI drives)
Expansion Slots
Chassis: Seven (7) I/O chassis slots
Motherboard: total of six (6) PCI-X slots including one (1) SXB (Super
Extended Bus) slot

Appendix C: System Specifications

Appendix C
®
TM
Xeon
processors to 2.40 GHz+ at a
C-1

Advertisement

Table of Contents
loading

Table of Contents