Installing The Server Into The Rack - Supero SuperServer 7042P-8R User Manual

S S
UPER ERVER 7042P-8R Manual

Installing the Server into the Rack:

You should now have rails attached to both the chassis and the rack unit.
The next step is to install the server into the rack. Do this by lining up the
rear of the chassis rails with the front of the rack rails. Slide the chassis
rails into the rack rails, keeping the pressure even on both sides (you may
have to depress the locking tabs when inserting).
When the server has been pushed completely into the rack, you should
hear the locking tabs "click". Finish by inserting and tightening the thumb-
screws that hold the front of the server to the rack (see Figure 2-5).
Figure 2-5. Installing the Server into a Rack
2-6