Table of Contents
Advertisement
5-6
Adding PCI Cards
1.
PCI slots:
The P4DP8-G2 has two 64-bit, 100 MHz PCI-X, four 64-bit, 66 MHz PCI
and one SXB (Super Extended Bus) slots. The SC822S chassis accom-
modates up to six low profile add-on cards.
2.
PCI card installation:
Before installing a PCI add-on card, make sure you install it into a slot that
supports the speed of the card (see step 1, above). Begin by swinging
the release tab on the I/O backpanel shield out to the left for the PCI slot.
Insert the PCI card into the correct slot on the motherboard), pushing
down with your thumbs evenly on both sides of the card. Finish by
pushing the release tab back to its original (locked) position. Follow this
procedure when adding a card to other slots.
Chapter 5: Advanced Motherboard Setup
5-9
Advertisement
Table of Contents
