Work Mode Setup - EDAN Norav NECG-12 Operating Manual

NECG-12

9.2 Work Mode Setup

Select Work Mode on the System Setup screen, and then press Enter to open the Work Mode
Setup window.
Item
Mode Options
Auto DispStyle
Manual Style
Rhythm Style
Sampling Mode
(Only available in
the auto mode)
Electrocardiograph User Manual
Figure 9-1 Work Mode Setup Window
Description
Select a working mode.
Choose from: MANU, AUTO, RHYT, R-R or VCG
Select a style to display the ECG waves of 12 leads in the auto mode.
Choose from: 3×4, 3×4+1R, 3×4+3R, 6×2, 6×2+1R or 12×1
Select a style to display and print the ECG waves in the manual mode.
Choose from: 3 channels, 6 channels or 12 channels
Select a style to print the ECG waves of the appointed rhythm lead.
Choose from: Single Lead or Three Leads
Choose from: Pre-Sample, Real-time Sample, Triggered Sample or
Periodic Sample
Select Pre-Sample, 10s ECG data sampled before pressing the
PRINT/STOP key will be printed out.
NOTE: When Sampling Mode is set to Pre-Sample, if you press
the PRINT/STOP key before the electrocardiograph
samples for 10s, the recorder will not respond.
- 76 -
Operation Instructions for ECG