Table of Contents
Advertisement
S
S
UPER
ERVER 6024H-82R/6024H-82/6024H-i2 User's Manual
GLAN Enable/Disable
Change the setting of jumper JPL1 to
enable or disable the onboard GLAN
ports (GLAN1 and GLAN2) on the
serverboard. See the table on the
right for jumper settings. The default
setting is enabled
SCSI Controller Enable/
Disable (X6DH8-G2 only)
Jumper JPA1 allows you to enable or
disable the SCSI headers. The de-
fault setting is pins 1-2 to enable all
four headers. See the table on the
right for jumper settings.
SCSI Termination Enable/
Disable (X6DH8-G2 only)
Jumpers JPA2 and JPA3 allow you
to enable or disable termination for
the SCSI connectors. Jumper JPA2
controls SCSI channel A and JPA3
is for channel B.
ting is open to enable (terminate)
both SCSI channels.
Note: In order for the SCSI drives
to function properly, please do not
change the default setting set by
the manufacturer. See the table on
the right for jumper settings.
The default set-
5-18
GLAN
Enable/Disable
Jumper Settings
(JPL1)
Jumper
Position
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
SCSI Enable/Disable
Jumper Settings
(JPA1)
Jumper
Position
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
SCSI Channel Termination
Enable/Disable
Jumper Settings
(JPA2, JPA3)
Jumper
Position
Definition
Open
Enabled
Closed
Disabled
Advertisement
Table of Contents
