RCm Atom E Use And Maintenance Manual page 60

1) The motor-sweeper must be inspected by a specialist technician who checks its safety or for any damage or defects
in the following cases:
• before it is put into operation
• after modifications or repairs
• at regular intervals, as indicated in the "Routine maintenance and control operations" table.
2) Every six months check that the safety devices are in good working order; the inspection must be made by
authorized specialist staff.
To ensure that the safety devices are operating properly, the machine must be overhauled by skilled staff every 5
years.
3) The person in charge of the machine must make an annual check on its condition. During this check, he must
decide whether the motor-sweeper still complies with the technical safety regulations, and then apply a marker plate
to the machine to indicate that the check has been made.
Periodic maintenance and checks
1 Check level of electrolyte in batteries
2 Check carbon brushes of drive motor
3 Check carbon brushes of brush and suction fan motors
4 Check that the main brush is not entangled with string, wire, etc.
5 Check and clean panel filter
6 Replace panel filter
7 Check traces of side brush(es)
8 Check belt tension
Atom E
Safety checks
8
!
!
Every ..... hours
40 150 500 1500
!
!
!
!
!
!
57