Daikin BRC1H519K Installer And User Manual page 21

Address
Second level
AirNet address
To connect the system to the AirNet monitoring and diagnostics
system, you need to set AirNet addresses for:
▪ Indoor units ("I/U")
BRC1H519W+K+S
Wired remote controller
4P513689-1A – 2018.03
Define an address for the indoor unit.
To SET an address, make sure
Apply settings.
To RELEASE an address that was previously set, change
settings.
▪ Outdoor units ("O/U")
The Group address and AirNet address menu has two levels. You
define groups and/or units in the first level, and set and release an
address for those groups and/or units in the second.
14 Configuration
Description
is selected.
to
Installer and user reference guide
and then apply
21