Table of Contents
Advertisement
6.5.2
Ventilation rate
The ventilation rate is the fan speed during ventilation operation.
To set the ventilation rate
1 Navigate to the ventilation rate menu.
2 Use
and
to adjust the ventilation rate.
3 Press
to confirm.
Result: The heat reclaim ventilation unit changes its ventilation rate
and the controller returns to the home screen.
6.6
Advanced operation
The controller only allows for basic operation. For advanced
operation, use the Madoka Assistant app.
6.6.1
To make a Bluetooth connection
Prerequisite: You have a mobile device on which the Madoka
Assistant app is installed and running.
Prerequisite: Your mobile device supports Bluetooth version 4.2.
1 Open the Madoka Assistant app and follow the instructions from
there.
7
Maintenance and service
7.1
Overview: Maintenance and
service
When the system needs to be maintained or serviced, consult your
dealer.
When
the
following
indoor
maintenance, you will be confronted by a maintenance screen as
soon as you try to enter the main menu:
For the installer
9
About the box
9.1
To unpack the controller
1 Open the box.
2 Separate the accessories.
BRC1H519W+K+S
Wired remote controller
4P513689-1A – 2018.03
unit
components
are
due
Clean filter
8
Troubleshooting
8.1
Overview: Troubleshooting
When the system is in error and the controller presents you with an
error screen as soon as you try to enter the main menu, consult your
dealer.
Error screen (example)
8.2
Refrigerant leak detection
When the system detects a refrigerant leak, an alarm goes off. Stop
the alarm and consult your dealer.
8.2.1
To stop the leak detection alarm
1 Press
for 3 seconds to stop the alarm.
Result: The alarm stops.
for
2 Consult your dealer.
a
b
1×
2×
a
Installation and operation manual
b
Wood screws + wall plugs (Ø4.0×30)
7 Maintenance and service
Maintenance screens
Replace filter
Empty dust collector
Installer and user reference guide
9
Advertisement
Table of Contents
Troubleshooting
