Chapter 2: Installation Procedures
Section 1: Removing and Installing the components
Before installing any components, replacing chassis fans or accessing the
motherboard, you will need to remove the top cover, the front bezel, the fans
and the air shrouds from the chassis first.
A. Removing the top cover from the chassis
Procedures
1. Press the release tabs to release the top cover from its locking posi-
tion.
2. Slide the top cover out from the chassis as shown below:
1. Press the release but-
tons
3. You can now lift the side cover up and off the chassis.
Chapter 2: Installation Procedures
2. Slide the top cover out
from the chassis
2-1