Table of Contents
Advertisement
Chapter 2: Installation Procedures
D-2 Rack Installation for the Open-Rack Design
After you have installed the inner rails on the chassis, you are ready to
install the outer rails of rail assemblies to the rack.
(* The rails are designed to fit in the racks with the depth of 28" to
33".)
Procedures
1. In the package, locate a pair of front (-short) and rear (-long) brackets.
Please note that the brackets are marked with Up/Front Arrows (-front) and
Up/Rear arrows (-rear).
2. Secure the front (-short) bracket (marked with the Up/Front arrows) to
the outer rail with two Type G screws as shown below:
G
2
2-9
Advertisement
Table of Contents
