General Information
Document Orientation
This manual describes the operation of the Keysight Model 66312A Dynamic Measurement DC Source
and the Keysight Model 6611C, 6612C 6613C and 6614C System DC Power Supplies. Unless otherwise
noted, all units will be referred to by the description "dc source" throughout this manual. The following
documents and software are shipped with your dc source:
a User's Guide (this document), contains installation, checkout, and front panel information
a Programming Guide, contains detailed GPIB programming information
The following Getting Started Map will help you find the information you need to complete the specific
task that you want to accomplish. Refer to the table of contents or index of each guide for a complete list
of the information contained within.
Installing the unit
Line voltage connections
Computer connections
Load connections
Checking out the unit
Verifying proper operation
Using the front panel
Calibrating the unit
Using the front panel
Front panel keys
Front panel examples
Using the programming interface
GPIB interface
RS-232 interface
Programming the unit using SCPI (and Compatibility)
commands
SCPI commands
SCPI programming examples
Compatibility language
Installing the VXIplug&play instrument driver
NOTE: The driver must be installed on your pc to access
the on-line information. Drivers are available on the web at
www.keysight.com/find/drivers.
Getting Started Map
Task
Where to find information
User's Guide
User's Guide
User's Guide
User's Guide
Programming Guide
Programming Guide
Programming Guide
2
17