Using The Blue Screen Function - Sharp PG-D120U Operation Manual

On-screen Display
I M A G E A D J .
B L U E S C R E E N [ O N ]
[
B L A C K S C R E E N O F F
[
I N P U T D I S P L A Y O F F
S Y S T E M
R E V E R S E [ O F F
[
I N V E R T O F F
: S E L .
: A D J . MENU : E N D
On-screen Display
REMAIN 5M
REMAIN 4M
REMAIN 1M
On-screen Display
I M A G E A D J .
B L A C K S C R E E N [
O F F
I N P U T D I S P L A Y [ O F F
[
E - Z O O M O F F
[
R E V E R S E O F F
I N V E R T [
O F F
: S E L .
: A D J . : E N D
MENU

Using the Blue Screen Function

This projector is equipped with a Blue Screen function
that will turn the screen blue when the video input termi-
nal is not connected to anything, or the video component
is turned off.
]
]
Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT / buttons to
]
]
select IMAGE ADJ. Then press the ENTER button to
display the IMAGE ADJ. screen as shown. Press the
ADJUSTMENT / buttons to select "BLUE SCREEN,"
and press the ADJUSTMENT
or OFF. Press the MENU button to return to the normal
screen.
When the Blue Screen function is on, the screen will
turn blue when no video signal is being input through
the video input terminal.
When the Blue Screen function is on, and no video
signal is input via the input terminal for more than 15
minutes, the power is automatically turned off.
The indicators appear as shown each minute before the
power is turned off, from five minutes before until one
minute before.
Notes:
The Blue Screen Function does not operate in RGB mode.
When the power is turned off, the POWER indicator will light
red.
To turn the power on again, press the POWER button to set it
to OFF, then press it again to set it to ON.
Using the On-Screen Display Override
Function
The On-Screen Displays ("RGB 1024
that appear during input select can be turned off.
]
]
Press the MENU button. While the MENU screen is
]
]
displayed, press the ADJUSTMENT / buttons to
]
select IMAGE ADJ. Then press the ENTER button to
display the IMAGE ADJ. screen as shown. Press the
ADJUSTMENT / buttons to select "INPUT DISPLAY,"
and press ADJUSTMENT
OFF.
When OFF is selected, the On-Screen Display ("RGB
1024
input select.
/
768, 60Hz," etc.) will not be displayed during
/ buttons to select ON
768, 60Hz," etc.)
buttons to select ON or
E-29