Connecting The Projector - Sharp PG-D120U Operation Manual

Connecting the Projector

Input terminals
This section explains how to connect the projector to audio/video equipment such as a VCR, Laser Disc, or external
audio amplifier.
Always turn off the LCD Projector while connecting to video equipment, in order to protect both the projector
and the equipment being connected.
Press on the portion labeled PUSH and open the cover to make the necessary connections.
Used when the AV equipment to
be connected has an S-VIDEO
output terminal.
VIDEO IN AUDIO IN
S-VIDEO
VIDEO L R
Play
To video
back
output
terminal
To S-video
To audio
output
output
terminal
terminals
VCR
E-14
PC CONTROL MOUSE FOR PC98
IN COMPUTER RGB OUT AUDIO
L R
Play
back
To audio
input
terminals
Amplifier
Note the following when using the S-VIDEO INPUT
terminal:
The S-VIDEO INPUT terminal uses a video signal
system in which the picture is separated into a color
and a luminance signal to realize a higher-quality
picture.
WIRED
REMOTE
The S-VIDEO INPUT terminal has priority over the
VIDEO INPUT terminal. Make the audio connection via
OUT
COMPUTER
AUDIO IN
the VIDEO INPUT audio terminals (left/right).
The S-VIDEO INPUT terminal is used when the AV
equipment to be connected has an S-VIDEO output
terminal.
Note:
By using the external amplifier, the volume can be amplified
for greater sound.