Table of Contents
Advertisement
On-Screen Display
I M A G E
A D J .
[
]
B L U E
S C R E E N
O N
[
B L K S C R N D I S P
O F F
I N P U T
D I S P L A Y
[
O F F
S Y S T E M
[
R E V E R S E
O F F
[
I N V E R T
O F F
: S E L .
: A D J .
MENU
: E N D
On-Screen Display
REMAIN 5M
REMAIN 4M
REMAIN 1M
On-Screen Display
I M A G E
A D J .
[
B L K S C R N D I S P
O F F
[
I N P U T
D I S P L A Y
O F F
R E V E R S E
[
O F F
I N V E R T
[
O F F
: S E L .
: A D J .
MENU
: E N D
Using the Blue Screen Function
This projector is equipped with a Blue Screen function
that will turn the screen blue when the video input
terminal is not connected to anything, or the video
component is turned off.
]
]
Press the MENU button. While the MENU screen is
]
displayed, press the ADJUSTMENT / buttons to
]
select "IMAGE ADJ." Then press the ENTER button to
display the IMAGE ADJ. screen as shown. Press the
ADJUSTMENT / buttons to select "BLUE SCREEN,"
and press the ADJUSTMENT
or OFF. Press the MENU button to return to the normal
screen.
When the Blue Screen function is on, the screen will
turn blue when no video signal is being input through
the video input terminal.
When the Blue Screen function is on, and no video
signal is input via the input terminal for more than 15
minutes, the power is automatically turned off.
The indicators appear as shown each minute before the
power is turned off, from five minutes before until one
minute before.
Notes:
The Blue Screen Function does not operate in RGB mode.
When the power is turned off, the POWER indicator will light red.
To turn the power on again, press the POWER button to set it to OFF,
then press it again to set it to ON.
Using the Input Mode On-Screen
Display Override Function
The On-Screen Displays that appear during input select
("RGB 1,024 @ 768, 75 Hz," etc.) can be turned off.
]
]
Once INPUT DISPLAY is turned off, the On-Screen
]
]
Displays will not appear even if the INPUT CHECK button
on the remote control is pressed.
• Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT / buttons to
select "IMAGE ADJ." Then press the ENTER button to
display the IMAGE ADJ. screen as shown. Press the
ADJUSTMENT / buttons to select "INPUT DISPLAY,"
and press ADJUSTMENT
OFF.
• When OFF is selected, the On-Screen Display ("RGB
1,024 @ 768, 75 Hz," etc.) will not be displayed during
input select.
/
buttons to select ON
/
buttons to select ON or
E-30
Advertisement
Table of Contents
