Using The Image Invert/Reverse Function; Image Adj - Sharp PG-D120U Operation Manual

Using the Image Invert/Reverse Function

This projector is equipped with an image invert/reverse function. The projected image can be inverted or reversed
by using the MENU button and the ADJUSTMENT / and
1
I M A G E
B L A C K
I N P U T
E - Z O O M
R E V E R S E
I N V E R T
: S E L .
: A D J .
2
] [
F F O
] [
F F O
] F F O [
] [
N O
] [
F F O
3
N O
] [
F F O
] [
F F O
] [
F F O
] [
F F O
] [
4
: A D J .
: S E L .
I N V E R T
R E V E R S E
E - Z O O M
I N P U T
B L A C K
I M A G E
How to set up the projector and screen
Caution: When setting up the projector
Do not place it in humid or dusty places, or places where the air is sooty of full of cigarette smoke. If the lens,
mirror, or other optical components become dirty, the picture will blur or darken, making viewing difficult.
Do not expose to extreme heat or cold.
Operating temperature: 41 F to 104 F (5 C to 40 C)
Storage temperature: -4 F to 132 F (-20 C to 60 C)
Do not tilt the projector more than 5 .
Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out
colors, making viewing difficult. Close the curtains and dim the lights when using the screen in a bright or sunny
room.
The best picture will be obtained when the projector is at a 90 degree angle to the screen. Position the projector
and screen as shown on the previous page.
A D J .
[ ]
S C R E E N O F F
[ ]
D I S P L A Y O F F
[ O F F ]
[ ]
O F F
[ ]
O F F
MENU : E N D
J . D A E G A M I
N E E R C S K C A L B
Y A L P S I D T U P N I
M O O Z - E
E S R E V E R
T R E V N I
. L E S :
D N E : N U M E J . D A :
D N E : MENU J . D A :
. L E S :
T R E V N I
E S R E V E R
M O O Z - E
Y A L P S I D T U P N I
N E E R C S K C A L B
J . D A E G A M I
M E N U : E N D
O N
[ ]
O N
[ ]
O F F
[ ]
D I S P L A Y O F F
[ ]
S C R E E N O F F
[ ]
A D J .
/ buttons.
1. Press the MENU button.
With the MENU screen displayed, press the
ADJUSTMENT / buttons to select IMAGE ADJ. Then
press the ENTER button to display the IMAGE ADJ.
screen.
The last MENU screen selected is indicated for about
30 seconds.
2. Reversed Image Mode
In the IMAGE ADJ. menu, press the ADJUSTMENT /
buttons to select REVERSE. Then press the
ADJUSTMENT / buttons to select ON. The reversed
image will appear.
3. Inverted Image Mode
In the IMAGE ADJ. menu, press the ADJUSTMENT /
buttons to select INVERT. Then press the ADJUSTMENT
/ buttons to select ON. The inverted image will
appear.
4. Reversed Inverted Image Mode
In the IMAGE ADJ. menu, set the REVERSE and INVERT
functions to ON. The reversed inverted image will appear.
5. Press the MENU button anytime to exit

IMAGE ADJ.

E-11