Adjusting The Audio; Sound Mode - Sharp PG-D120U Operation Manual

Adjusting the Audio

The projector's audio is factory preset to the standard setting. However, you can adjust it to suit your own prefer-
ence with the ADJUSTMENT buttons on the projector or the remote control.
You can adjust the BALANCE, TREBLE and BASS, and also select the SRS 3-D SOUND mode.
To return to the factory preset mode, press the ADJUSTMENT / buttons to select RESET, then press the
ENTER button.
Press the MENU button to select the normal screen mode.
On-Screen Display
A U D I O
B A L A N C E
T R E B L E
B A S S
3 - D S O U N D
R E S E T
: S E L .
: A D J .
SRS 3-D SOUND (OFF)
On-Screen Display
A U D I O
B A L A N C E
T R E B L E
B A S S
3 - D S O U N D
R E S E T
: S E L .
: A D J .
On-Screen Display
3 - D S O U N D
M O D E 1
M O D E 2
M O D E 3
M O D E 4
3 - D M O N O
: S E L .
0
L
R
0 - +
0
- +
[ O F F ]
MENU : E N D
0 L R
0
- +
0
- +
[ ]
O N
ENTER : N E X T
MENU : E N D
S O U N D
: E N T E R
ENTER
MENU : E N D
Adjusting the Balance, Treble, Bass
Press the MENU button.
Select AUDIO with the ADJUSTMENT / buttons.
Then press the ENTER button to change to the picture
indicated on the left.
Select BALANCE, TREBLE or BASS with the
ADJUSTMENT / buttons. Adjust the mode you want
with the ADJUSTMENT
To return to the factory preset mode, press the
ADJUSTMENT / buttons to select RESET, then press
the ENTER button.
Note:
When the SRS 3-D SOUND is turned on, the balance is reset.
Description of Adjustment Items
Selected items ADJUSTMENT
BALANCE Increased audio from the
left speaker
TREBLE Weaker treble
BASS
Weaker bass
Selecting and Adjusting the SRS 3-D

SOUND Mode

The Sound Retrieval System is a sound system that
recreates the effect of three dimensional acoustics. This
allows one to enjoy a dynamic sound with a feeling of
both width and depth.
Press the MENU button. Select AUDIO with the
ADJUSTMENT / buttons. Then press the ENTER
button to change to the picture indicated on the left.
Select SRS 3-D SOUND with the ADJUSTMENT /
buttons. Then press the ADJUSTMENT
select ON, and press the ENTER button to change the
image.
The five types of SRS 3-D modes are listed below.
Press the ADJUSTMENT / buttons to highlight the
SRS 3-D mode desired yellow. Then press the ENTER
button to set the SRS 3-D mode.
Description of Adjustment Items
Mode 1 Sound image that produces an intimate soundfield as
in a medium-sized hall.
Mode 2 Maximum soundfield as music comes out beyond the
speakers.
Mode 3 Great for live recording and vocal music.
Mode 4 This setting greatly increases the amount of vocals or
center sounds in a recording.
Mono 3-D stereo sound from a monaural sound source.
/ buttons.
button ADJUSTMENT
Increased audio from the
right speaker
Stronger treble
Stronger bass
/ buttons to
button
E-25