Table of Contents
Advertisement
On-Screen Display
I M A G E A D J .
[
]
B L U E S C R E E N
O N
B L K S C R N D I S P
[
O F F
I N P U T D I S P L A Y
[
O F F
S Y S T E M
[
R E V E R S E
O F F
[
I N V E R T
O F F
: S E L .
: A D J .
MENU
: E N D
REMAIN 5M
REMAIN 4M
REMAIN 1M
I M A G E A D J .
B L K S C R N D I S P
[
O F F
I N P U T D I S P L A Y
[
O F F
R E V E R S E
[
O F F
[
I N V E R T
O F F
: S E L .
: A D J .
MENU
: E N D
Using the Blue Screen Function
This projector is equipped with a Blue Screen function
that will turn the screen blue when the video input termi-
nal is not connected to anything, or the video component
]
is turned off.
]
• Press the MENU button. While the MENU screen is displayed,
]
]
press the ADJUSTMENT ƒ/∂ buttons to select "IMAGE
ADJ." Then press the ENTER button to display the IMAGE
ADJ. screen as shown. Press the ADJUSTMENT ƒ/∂ but-
tons to select "BLUE SCREEN," and press the ADJUST-
MENT ß/© buttons to select ON or OFF. Press the MENU
button to return to the normal screen.
• When the Blue Screen function is on, the screen will turn blue
when no video signal is being input through the video input
terminal.
• When the Blue Screen function is on, and no video signal is
input via the input terminal for more than 15 minutes, the
power is automatically turned off.
• The indicators appear as shown each minute before the
power is turned off, from five minutes before until one minute
before.
Notes:
• The Blue Screen Function does not operate in RGB mode.
• When the power is turned off, the POWER indicator will light red.
• To turn the power on again, press the POWER button to set it to OFF,
then press it again to set it to ON.
Using the Input Mode On-Screen Display
Override Function
]
The On-Screen Displays that appear during input select
]
("RGB 1,024
]
]
Once INPUT DISPLAY is turned off, the On-Screen Dis-
plays will not appear even if the INPUT CHECK button on
the remote control is pressed.
• Press the MENU button. While the MENU screen is displayed,
press the ADJUSTMENT ƒ/∂ buttons to select "IMAGE
ADJ." Then press the ENTER button to display the IMAGE
ADJ. screen as shown. Press the ADJUSTMENT ƒ/∂ but-
tons to select "INPUT DISPLAY," and press ADJUST-
MENT ß/© buttons to select ON or OFF.
• When OFF is selected, the On-Screen Display ("RGB
1,024
select.
768, 75 Hz," etc.) can be turned off.
768, 75 Hz," etc.) will not be displayed during input
E-28
Advertisement
Table of Contents
