Adjusting The Picture - Sharp PG-D120U Operation Manual

Adjusting the Picture

This projector's picture is factory preset to standard settings. However, you can adjust it to suit your own prefer-
ences with the ADJUSTMENT buttons on the projector and the remote control.
The adjustments can be memorized in RGB or VIDEO separately.
Four picture modes can be adjusted: "PICTURE," "BRIGHT," "RED," and "BLUE."
Adjusting the Picture
1
On-Screen Display
R G B A D J .
R G B I N P U T
I M A G E A D J .
A U D I O
S Y S T E M S E T U P
L A N G U A G E
: S E L .
2
R G B A D J .
P I C T U R E
B R I G H T
R E D
B L U E
R E S E T
M E M O R Y S E L E C T
: S E L .
: A D J .
3
P I C T U R E
: S E L .
: A D J .
A D J .
: N E X T
ENTER
MENU : E N D
0
- +
0
- +
0
- +
0 -
+
ENTER : N E X T
MENU : E N D
0
- +
ENTER : E N T E R
: E N D
MENU
1. Use the MENU button to select the mode
to be adjusted.
When the MENU button is pressed, the MENU mode is
indicated for about 30 seconds. Press the ADJUST-
MENT / buttons to select "RGB ADJ.," then press the
ENTER button.
2. Adjust the Picture
Press the ADJUSTMENT / buttons to highlight the
picture adjustment item you want to adjust yellow.
Press the ADJUSTMENT
mark of the selected adjustment item to the desired
setting.
The adjustment mode is displayed for about 30
seconds.
Description of Adjustment Items
Selected item ADJUSTMENT
PICTURE For less contrast
BRIGHT For less brightness
RED For weaker red
BLUE For weaker blue
COLOR For less color intensity
TINT Skin tones become purplish
SHARPNESS For less sharpness
RESET All RGB Video Adjustment items are returned to the
factory preset settings.
Note: To reset all adjustment items, select RESET in
"RGB ADJ. " mode and press ENTER button.
3. Display Only the Item to Adjust
Press the ADJUSTMENT / buttons to highlight the
picture adjustment item you want to adjust yellow. If you
press ENTER at this time, only the selected item will be
displayed.
Press the ADJUSTMENT
mark of the selected adjustment item to the desired
setting.
The adjustment mode is displayed for about 30
seconds.
Notes:
When a VIDEO signal input has been selected, only
"PICTURE," "BRIGHT," "COLOR," "TINT" and "SHARPNESS"
can be adjusted.
TINT only appears in NTSC mode.
4. Press the MENU button anytime to exit
RGB ADJ.
/ buttons to move the " "
button ADJUSTMENT button
For more contrast
For more brightness
For stronger red
For stronger blue
For more color intensity
Skin tones become greenish
For more sharpness
/ buttons to move the " "
E-23