G Centering; Centering - Sharp AR-BC260 Operation Manual

Centering

When the original and copy paper are of different sizes, CENTERING is used to shift the image to the center of the
copy paper but only in the left to right direction.
[Example]
Original
Touch the [CENTERING] key on the
1
SPECIAL MODES screen.
MARGIN SHIFT
CENTERING
2 Touch the [OK] key on the SPECIAL
MODES screen.
Return to the main screen of copy mode.
About the steps that follow
If a reversing single pass feeder is being used,
see pages 5-2 through 5-6. If the document
glass is being used, see pages 5-7 through 5-9.
To cancel the CENTERING function, touch the
[CENTERING] key again on the SPECIAL MODES
screen (step1).
Copy
The [CENTERING] key
is highlighted to indicate
that the function is
turned on, and the
centering icon ( ) will
appear in the upper left
of the screen.
G This function can be used to reduce a larger sized
original image and center it on a copy of smaller paper
size, as well as center a smaller original onto a larger
sized copy.
G This function will not work when non-standard size
originals or copy paper are used. This function cannot
be selected when enlargement copying has been
selected.
SPECIAL MODES
6
6-7