Sharp AR-BC260 Operation Manual page 51

Staple
Saddle stitch
Power supply
Dimensions
Weight
Overall dimensions when
attached to machine
Remarks
Paper output
Paper full detection
Offset function
Paper conveying
Name
Hole punching
Allowed paper sizes for
punching
Power supply
Dimensions
Weight
Specifications are subject to change for improvement without notice.
NOTES
G Transparency film, envelopes, postcards, and other special papers cannot be stapled.
G If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled.
Supplies
AR-SC2 staple cartridges must be used for this finisher.
The cartridge package contains three cartridges of approximately 5000 staples
each.
Allowed paper sizes for stapling
Upper tray: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
A3, B4, A4, A4R, B5
Lower tray: 11" x 17", 8-1/2" x 11"R, A3, B4, A4R
Maximum number of sheets for stapling
See "Staple sort mode" on the next page
Stapling positions
Upper tray: 3 locations (1 position back, 1 position front, 2 positions center)
Lower tray: 4-47/64" (120 mm) pitch from center of paper
Maximum of 10 sheets can be stapled (21 lbs. or 80 g/m
Paper size: 11" x 17", 8-1/2" x 11"R, A3, B4, A4R
Paper weight: 17 to 28 lbs. or 64 to 105 g/m
Supplied from machine (Stand / paper drawer)
24-59/64" (W) x 23-3/4" (D) x 30-23/64" (H)
(633 mm (W) x 603 mm (D) x 771 mm (H))
Approximately 79.4 lbs. (36 kg)
1432 mm (W) x 676 mm (D) (56-25/64" (W) x 26-5/8" (D)) (when tray is extended)
Upper tray: Supports both face-up and face-down output Lower tray: Face-down output only
Both upper and lower tray
Upper tray only (offset function not possible for 12" x 18", 5-1/2" x 8-1/2"R, A3W
and A5R size paper)
Center reference
Punch module
3 or 2 holes
3 holes: 11" x 17", 8-1/2" x 11", A3, A4
2 holes: 8-1/2" x 14", 8-1/2" x 11"R
Supplied from machine saddle stitch finisher
3-3/4" (W) x 22-1/16" (D) x 6-45/64" (H) (95 mm (W) x 560 mm (D) x 170 mm (H))
Approximately 5.6 lbs. (2.5 kg)
SADDLE STITCH FINISHER
)
2
2
3
3-3