Sharp AR-BC260 Operation Manual page 129

Problem
Job cancelation Is a message requesting cancelation of job
needed displayed?
Scanning of Is a message indicating memory is full
originals is displayed?
incomplete.
The selected For an interrupt copy job, are you attempting
number of sets of color copying in sort mode?
copies is not printed.
Not all pages are When making copies, the memory became
copied full during scanning of the originals and a
message appears asking you whether you
want to continue copying or cancel.
Check
TROUBLESHOOTING
Solution or cause
Press the [CA] (clear all) key to cancel the
current job.
If the data amount exceeds the limit when
using the pamphlet copy or multi shot copy
which requires scanning of all originals,
scanning will be canceled and copying will
not be performed.
If you install an additional memory, the
storage capacity will increase.
When color copying is performed in sort
mode for an interrupt copy job, only one set
of copies can be made. If more than one set
is needed, replace the original and repeat
the copy procedure for each set needed.
When the memory becomes full during
scanning of the originals, you can select
whether you want to continue the job and
print only those originals that were scanned,
or cancel the job. If you continue the job,
copies will only be made of the originals that
were scanned, and thus all originals cannot
be copied at once.
7
7-5