Sharp AR-BC260 Operation Manual page 83

Copy output (sort and group)
Example: Making five sets or five copies each of three originals
G Sorting copies into sets
Original
SPECIAL MODES
2-SIDED COPY
OUTPUT
Set the
Touch the
number of
[OUTPUT] key
copies (5)
"Sort" is automatically selected when the
original is placed on the document feeder tray
of the reversing single pass feeder.
G Grouping copies by page
Original
SPECIAL MODES
2-SIDED COPY
OUTPUT
Set the
Touch the
number of
[OUTPUT] key
copies (5)
"Group" is automatically selected when the
original is placed on the document glass.
About the offset function
Offset function "ON"
READY TO COPY.
OUTPUT
SORT
LEFT TRAY
GROUP
Selecting the output tray
When the [LEFT TRAY] key in the above illustration
is highlighted, copies are output to the tray on the
left side of the machine (the left tray). When the
[CENTER TRAY] key is highlighted, copies are
output to the center tray. Touch the key of the tray
you wish to use for copy output.
OUTPUT
SORT
GROUP
Touch the
[SORT] key
OUTPUT
SORT
GROUP
Touch the
[GROUP] key
Offset function "OFF"
0
INTERRUPT
OK
OFFSET
CENTER
TRAY
Press the [BLACK
COPY START] key
Press the [COLOR
COPY START] key
Press the [BLACK
COPY START] key
Press the [COLOR
COPY START] key
This function offsets each set of copies from the
previous set in the output tray, making it easy to
separate sets of copies.
(Offset can function for output to the center tray or in
the offset tray of the saddle stitch finisher.)
Turning on the offset function
The offset function operates when a checkmark
appears in the [OFFSET] checkbox, which is
displayed by touching the [CENTER TRAY] key. (If a
checkmark doesn't appear, touch the checkbox.)
Offset width: Approximately 1-3/10" (30 mm)
(12" x 18" (A3W) paper cannot be offset.)
NORMAL COPYING
Five sets of copies
5 copies per page
5-5
5