Sharp AR-BC260 Operation Manual page 148

INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
8 Click the [Standard installation] button.
9 The printers that are connected to the
network are found. Select the machine and
click the [Next] button.
If the machine is not found, make sure that the
machine is powered on and connected to the
network and then search again. If the machine is
still not found, use the custom installation
procedure to directly specify the IP address (page
7).
10 A confirmation window will appear. Read
the contents and click the [Next] button.
11 Select the printer driver being installed as
the default printer and click the [Next]
button.
12 Check the contents of the window and
click the [Next] button.
Installation of the printer driver begins.
NOTE
When you are using Windows 2000/XP/Server
2003
If a warning message regarding the Windows logo
test or digital signature appears, be sure to click the
[Continue Anyway] or [Yes] button.
6
13 When the finish setup window appears,
click the [OK] button.
Click the [Close] button.
14
NOTE
A message prompting you to restart your computer
may appear after installation is finished. If this
message appears, click [Yes] to restart your
computer.
This completes the installation.