Sharp AR-BC260 Operation Manual page 149

I I I I Installing the printer driver (custom installation)
The procedure for a custom installation of the printer driver is explained here. Select [Custom installation] if you
wish to install a display font or directly specify the IP address of the machine.
Insert the "Software
1
accompanied the machine into your CD-
ROM drive.
2 Click the [start]
Computer], and then double-click the CD-
ROM icon.
In Windows 95/98/Me/NT 4.0/2000, double-click
[My Computer], and then double-click the CD-
ROM icon.
3 Double-click the [SETUP] icon.
4 The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement, and
then click the [Yes] button.
5 After confirming the message in the
"Welcome" window, click the [Next]
button.
6 Click the [Printer Driver] button.
To view detailed information on the software, click
the [Display Readme] button.
G If you wish to install the Printer Status Monitor, click
the [Printer Status Monitor] button and follow the
on-screen instructions.
G If you wish to install the printer administration
utility, click the [Administrator Tools] button in this
window and then click the [Printer Administration
Utility] button and follow the on-screen instructions.
INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
CD-ROM" that
button, click [My
Click the [Next] button.
7
8 Click the [Custom installation] button.
9 Select the [LPR Direct Print] and click the
[Next] button.
10 The printers that are connected to the
network are found. Select the machine and
click the [Next] button.
If you wish to directly specify the IP address, click
the [Specify Address] button, enter the IP address,
and click the [Search] button.
Be sure to ask your network administrator for the
correct IP address to be entered.
11 A confirmation window will appear. Read
the contents and click the [Next] button.
7